The Treatment of Auto Parts

In this era of rapid development, cars have become a must-have item for every household. Going to work, traveling, and as long as you are traveling, you can always go wherever you want. However, such a convenient thing to use can occasionally make people worry: the car has a bright and beautiful appearance, but the parts inside are dirty and there is no way to clean it. Don't worry, after reading this article, you will feel that everything is not a problem.

Engine cleaning:

The safety of the vehicle depends on the cleanliness of the engine compartment. According to incomplete statistics, 90% of automobile spontaneous combustion accidents are caused by the engine. During the use of the car, a thing called sludge will be produced on the surface of the engine, which greatly increases the probability of engine spontaneous combustion. Using sonic cleaning agents, vibrations are generated through different power-on frequencies, bubbles are generated in the water, and the bubbles burst to generate energy to clean the surface of the engine; if some chemicals are added, the effect of rust removal can also be achieved, and the surface of the engine has been well strengthened.

The engine surface is covered with dirt, which will affect the heat dissipation of the engine and cause the temperature of the engine compartment to be too high. On the one hand, it affects the service life of the engine, and on the other hand, it will accelerate the aging of internal components of the engine compartment such as wiring harnesses, posing a safety hazard. So regular cleaning of the engine is very useful!

Car wheel hub:

Car wheel hubs are used as supporting parts for tires. Car wheel hubs are usually made of aluminum alloy. In general, car wheel hubs are silver-white when they leave the factory. As the metal of the entire car body is close to the ground, car wheel hubs are very easy to get dirty. Moreover, due to the nature of its own material, it is particularly difficult to wash it off after getting dirty. If it is not cleaned for a long time, it will easily become rusty. For car wheel hubs, once they become rusty, they are not only unsightly, but also give people the illusion that the vehicle is about to be scrapped. In fact, it is very easy to deal with these stains. The surface of the wheel hub is roughly polished, and the stubborn dirt on the wheel hub is cleaned by ceramic sand blasting process, while the adhesion of the wheel hub surface is enhanced.

Sandblasting process plays a very important role in the surface treatment of auto parts. It can remove all dirt such as rust on the surface of auto parts, achieve the required roughness, greatly improve the connection between auto parts and coatings and plating materials, or make the bonding of adhesive parts more stable and of better quality.

B120 Ceramic Sand Blasting Turns Stone into Gold for Medical Device Manufacturing

When you hear the words "ceramic sand" and "sandblasting", you may find it difficult to associate them with medical devices. However, through the processing of ceramic sand blasting, medical devices such as artificial joints can achieve the standards that must be strictly implemented and written by the Food and Drug Administration (FDA).

The editor learned from Engineer Chen of Wuxi Henglihong B120 Ceramic Sand that "some of our medical device customers have trusted and relied on us for 20 years. Henglihong ceramic sand enables them to produce high-quality products, such as artificial joints. With the help of Henglihong ceramic sand blasting, these medical devices can fully meet strict standards."

Among Henglihong Ceramic Sand's many long-term customers, there is such a medical machinery artificial joint supplier whose medical devices have been approved and supported by the US FDA. Their president talked about the cooperation with Wuxi Henglihong Ceramic Sand. "They have been the leader in the sandblasting industry for more than 20 years, and there is no problem with their focus. Every time we ask them for help, we get satisfactory technical assistance from them. All we need to do is order their B120 ceramic sand every few months. We are really honored to have a partner like Henglihong."

Henglihong Ceramic Sand now has more medical customers due to the rapid growth of online promotion. "Henglihong Ceramic Sand is a perfect match with us, and they fully meet our growing needs." This is the evaluation of Henglihong Ceramic Sand by a famous medical device manufacturer. "Using Henglihong B120 ceramic sand as abrasive media to sandblast medical devices can achieve the effect of removing tiny burrs, which is so clean that you can't see it with the naked eye. It can also make a small rounded corner appear at the junction of two surfaces, making the surface of surgical instrument workpieces smooth and non-reflective. It can really be said to be efficient and high quality."

Even though the demand for Henglihong ceramic sand is increasing in the medical field, Henglihong insists that ceramic sand blasting is more meaningful as a service company than as a surface treatment material company. Engineer Chen said, "We spend more time on post-service to help our existing customers and optimize their results, which is more convincing than the features and advantages we describe in our products."